This E QD fashion bushing is a higher-strength quality bushing with a 1″ hole. What sets this bushing aside from other bushings is the higher-good quality steel design and strict high quality management methods concentrated on quality, value, and premium good quality client support. We also have a staff of very educated specialists to solution any questions you could have. For far more info or to get a excellent estimate, please make contact with us and we are going to be happy to help!

Proportions:

  • Bushing Sort: F
  • Bore Size: 1-1/4″
  • Dimension (A): .813″
  • Dimension (B): 4.437″
  • Dimension (D): 6.625″
  • Dimension (E): 2.813″
  • Dimension (F): 2.500″
  • Dimension (G): .188″
  • Dimension (L): 3.625″
  • Bolt Circle: 5.625″
  • Set Screw Dimensions: 1/2 – 13
  • Wrench Torque: 900 LBS
  • Weight: 11.fifty LBS

Regular Mounting

1. Make positive the cone on the bushing and the inside of the driven product is clear and cost-free of oil or any anti-seize lubricant.
2. Slide QD bushing on the shaft, flange conclude first, then assemble crucial.
3. Place the QD bushing on the shaft. Use only a standard Allen key to tighten the established screw on the important (hand-restricted). Will not drive way too challenging.
4. Slide the massive end of the sprocket or other component taper hole into spot over the cone, aligning the drilled bolt holes on the sprocket or other component with the taper holes in the bushing flange. Then assemble the pull-up bolt and lock washer.
5. Tighten the pull-up bolts alternately and evenly to the tightening ranges demonstrated in the torque table underneath. Do not use extensions on wrench handles. There ought to now be a gap amongst the encounter of the sprocket or other element hub and the flange of the QD bushing to ensure a satisfactory tapered grip and push match. Observe: This hole should not be shut.

Dismounting

one. Remove all pull-up bolts and thread them into the threaded holes in the sprocket or other component in opposition to the flange of the QD bushing to crack the tapered clamp.
2. Loosen the established screw and slide the QD bushing off the shaft.

Click on and check out out much more merchandise you might be hunting for.

Q1. Are you a manufacturing facility?
A. Indeed. We are a factory with far more than 15 many years of producing encounter.

Q2. Is OEM and ODM services offered?

A. Of training course. We have several a long time of experience in OEM&amp ODM provider.

Q3. I am purchasing from one more supplier, but require far better provider, would you match or beat the price I am having to pay?
A. We usually really feel we give the very best provider and competitive charges. We would be more than satisfied to personalize a aggressive estimate for you, just email us.