JS100 Series Grid Coupling
Grid Type Couplings are multi-piece mechanical couplings used to transmit torque and rotation between shafts in mechanical power transmission assemblies. Their design allows them to accommodate slight alignment changes that occur between connecting shafts, while also absorbing shock loads. CHINAMFG is a leading grid coupling manufacturer in China, a grid coupling supplier in China offering the latest and modern Grid Type Couplings.
Grid Coupling is widely used in metallurgy, mining, lifting, transportation, petroleum, chemical, ships, textile, light industry, agricultural machinery, printing machines and pumps, fans, compressors, machine tools and other mechanical equipment and industry shaft transmission.
1.The serpentine spring as the elastic element, the elastic strong at the same time, greatly improves the grid coupling torque, widely used in heavy machinery and general machinery. The serpentine spring special technology department, has long service life, allowing higher speed, has good ability to compensate in the axial, radial and angle
2.High transmission efficiency, start safety. Transmission efficiency of up to 99.47%, short-time overload capacity is 2 times the rated torque, operation safety.
3.Simple structure, convenient assembly and disassembly, long service life
4.Damping effect is good to avoid the resonance.
♦Basic Parameter and Main Dimension
Requires various non-standard shaft holes, keyways and shaft hole fitting lengths, please indicate this when ordering, and the factory will undertake the manufacture.
All the above models can be supplied on a non-standard basis.
♦Other Products List
|High Flexible Coupling
HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Shipping
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.
Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3: How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstance.
Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.
Q 7: Do you have inspection procedures for coupling ?
A: 100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Q 9: What’s your payment?
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
Is it Possible to Replace a Motor Coupling Without Professional Assistance?
Replacing a motor coupling can be a relatively straightforward task, and it is possible to do it without professional assistance, depending on your level of mechanical skill and experience. However, it is essential to exercise caution and follow proper procedures to ensure a successful replacement and prevent any potential damage.
If you have a basic understanding of mechanical systems and tools, you can attempt to replace a motor coupling by following these general steps:
- Turn Off Power: Before starting any work, make sure to turn off the power supply to the motor to prevent accidents.
- Access the Coupling: Locate the motor coupling, which connects the motor shaft to the driven shaft or load. It is often situated near the motor or at the input of the driven equipment.
- Remove Guards and Covers: If applicable, remove any guards or covers that may be concealing the coupling and motor assembly.
- Loosen Fasteners: Loosen and remove the fasteners, such as set screws or bolts, that secure the coupling halves to the motor and driven shafts.
- Remove Old Coupling: Carefully slide or separate the old coupling from the motor and driven shafts.
- Install New Coupling: Place the new coupling onto the motor and driven shafts, ensuring proper alignment and engagement.
- Tighten Fasteners: Securely tighten the fasteners to hold the new coupling in place.
- Check Alignment: Verify that the motor and driven shafts are aligned properly to prevent premature wear and damage to the new coupling.
- Replace Guards and Covers: Once the new coupling is installed and aligned, replace any guards or covers that were removed.
- Turn On Power: After completing the replacement, turn the power supply back on and test the motor and driven equipment for proper operation.
While the process seems straightforward, it is essential to refer to the specific instructions provided by the manufacturer of the motor and coupling. Some couplings may have unique installation requirements, and following the manufacturer’s guidelines ensures optimal performance and safety.
If you are unsure about any aspect of the replacement process or encounter difficulties during the procedure, it is recommended to seek assistance from a qualified professional or a trained technician to avoid any potential damage to the motor or equipment.
Real-world examples of motor coupling applications in various industrial setups.
Motor couplings find extensive applications across diverse industrial setups, connecting motors to driven equipment and transmitting torque efficiently. Here are some real-world examples of motor coupling applications:
1. Conveyor Systems
In manufacturing and logistics industries, motor couplings are used in conveyor systems to transfer goods and materials from one point to another. Flexible couplings accommodate misalignments between conveyor sections, while backlash in certain couplings helps absorb shocks from the load and avoid damage.
2. Pumps and Compressors
In water treatment plants, chemical processing facilities, and oil refineries, motor couplings are employed in pumps and compressors. Rigid couplings are often used in high-torque applications where precise alignment is critical to maintain pump efficiency and prevent shaft misalignment issues.
3. CNC Machines
In computer numerical control (CNC) machines, motor couplings connect the spindle motor to the cutting tool or workpiece. High precision and low backlash couplings are used to ensure accurate and repeatable movements during machining operations.
4. Printing Presses
In the printing industry, motor couplings are utilized in printing presses to drive paper feeders, ink rollers, and other components. Flexible couplings help absorb vibrations and misalignments, reducing wear on machine parts and improving print quality.
5. Packaging Machinery
Motor couplings are integral to packaging machinery, such as form-fill-seal machines, capping machines, and labeling systems. Couplings facilitate smooth and reliable motion transmission, allowing for precise and efficient packaging processes.
6. Textile Machinery
In textile manufacturing, motor couplings are used in spinning, weaving, and dyeing machines. Couplings accommodate frequent starts and stops, shock loads, and speed variations, ensuring stable and consistent operation.
In industrial robotics, motor couplings are vital components that connect the motor to the robotic arms and joints. High-performance couplings with low backlash and high torsional stiffness are used to achieve precise and responsive robot movements.
8. Food Processing Equipment
Motor couplings are found in food processing equipment, including mixers, grinders, and slicers. Stainless steel couplings are often used to meet hygiene standards, while flexible couplings protect motors and gearboxes from sudden loads during food processing.
These examples highlight the versatility of motor couplings in various industrial applications. The choice of coupling type depends on factors such as load characteristics, speed requirements, misalignment allowances, and specific environmental conditions in each industrial setup.
Comparison between Grid Couplings and Other Types of Flexible Couplings
Flexible couplings are essential components in mechanical power transmission systems, and different types of couplings offer various features and advantages. Here is a comparison between grid couplings and some other common types of flexible couplings:
The choice of coupling type depends on the specific requirements of the application. Grid couplings are favored in heavy-duty industrial machinery that requires high torque capacity and misalignment tolerance. Elastomeric couplings are commonly used in general industrial applications where flexibility and damping of vibrations are crucial. Gear couplings find applications in high-speed machinery and equipment. Ultimately, the selection of the right coupling type involves considering factors such as torque requirements, misalignment conditions, operating speed, space constraints, and budget considerations.
editor by CX 2023-12-13