We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Solution characteristic:
Induction Cooker Motor with UL CE acceptance:
1. Stator dimension is optional
two. Risk-free, reliable, low sounds, very good beginning, lengthy existence
three. Powerful electricity
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Normal utilised:
Exhaust enthusiast, air purifier, micro-oven, supporter, induction cooker, fridge, pump, heater, hood oven, blwer, air conditioner, Heater devices, dehumidifiers
Thermal protector with one shot fuse or multi shot fuse
MODEL | STATOR SIZE | SHAFT DIA | VOLT | Enter POWER | TORQUE (g.cm) | Velocity RATED |
YJ4808B | 8mm | 4mm | 110-240V | 6W | 1.12mN.m | 3400RPM |
YJ4810B | 10mm | 4mm | 110-240V | 10W | 3.42mN.m | 3000RPM |
YJ4810C | 10mm | 5mm | 110-240V | 14W | three.82mN.m | 3000RPM |
YJ4815B | 15mm | 4mm | 110-240V | 11W | 7.97mN.m | 3400RPM |
ABOUT US
Ritscher group was established in 2006.we usually emphasis on micro-motors for family and industrial electrical appliance.Currently, we have skilled micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and far more than five hundred employees, annual output is 5 million pcs and has 10 million pcs annual making capability.After years improvement,we built a excellent status in the domestic and oversea market place and have the have confidence in from our global customers.
We started our enterprise from shaded pole motors, soon after 10 years advancement,our items is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our items are commonly utilized for making refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage devices and several other equipments.
To style the lastest engineering motors and fulfill our clients requirments,we have the quite able R&D crew,to make sure our products top quality ,we have extremely rigid deal with system for our generation division & QC office,to make our expense reduce,we have the really specialist obtain department, We devote to make every single particulars far better than we could do.
To offer fast and better services to our buyers in Australia and New Zeland,we set up branch office in Australia considering that 2017 with exprienced consultant to assist the organization ,which will carry much more clients to get know of us.
We will maintain performing our job,move ahead step by stage to make our enterprise location wider and brighter.
Our company FAQ for you
(1) Q: What sort motors you can offer?
A:For now,we primarily provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.
(2) Q: Is it feasible to check out your manufacturing facility
A: Positive. But you should kindly hold us posted a handful of times in progress. We need to examine our
schedule to see if we are offered then.
(3) Q: Can I get some samples
A: It relies upon. If only a couple of samples for individual use or replacement, I am scared it will
be difficult for us to give, since all of our motors are personalized made and no inventory
obtainable if there is no further requirements. If just sample screening before the formal purchase and
our MOQ, price tag and other terms are suitable, we might love to offer samples.
(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is between 1000~10,000pcs for various models soon after sample acceptance.
But it’s also ok for us to take smaller sized plenty like a handful of dozens, hundreds or hundreds
For the original 3 orders after sample approval.For samples, there is no MOQ need. But the much less the greater (like no much more than 5pcs) on problem that the quantity is enough in situation any modifications needed right after preliminary tests.
The use of original equipment manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our organization and the outlined replacement areas contained herein are not sponsored, accepted, or produced by the OEM.