Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
Are There Specific Safety Precautions to Consider When Working with Motor Couplings?
Yes, there are several safety precautions that should be taken into consideration when working with motor couplings:
- Lockout-Tagout Procedures: Before performing any maintenance or installation work on motor couplings, it is essential to follow proper lockout-tagout procedures. This involves disconnecting the power source and placing a lock and tag on the disconnect switch to prevent accidental energization of the equipment.
- Proper Personal Protective Equipment (PPE): When working with motor couplings, personnel should wear appropriate personal protective equipment, including safety glasses, gloves, and other necessary gear to protect against potential hazards and injuries.
- Securely Support Equipment: Ensure that all equipment connected to the motor coupling is securely supported to prevent unexpected movement or collapse during maintenance or operation.
- Avoid Excessive Misalignment: While motor couplings can compensate for misalignment to some extent, it is crucial to avoid excessive misalignment beyond the coupling’s specified limits to prevent premature wear and potential failure.
- Follow Manufacturer’s Instructions: Always adhere to the manufacturer’s guidelines, recommendations, and installation procedures when working with motor couplings. Improper installation or usage can lead to performance issues and safety hazards.
- Regular Inspection: Conduct regular inspections of motor couplings to identify any signs of wear, damage, or misalignment. Address any issues promptly to maintain safe and reliable operation.
- Stay Informed: Ensure that personnel working with motor couplings are properly trained and informed about potential risks and safety procedures.
- Safe Handling of Equipment: Use appropriate lifting and handling equipment when moving or installing motor couplings to prevent injuries and damage to the equipment.
- Environmental Considerations: Consider the environmental conditions in which the motor coupling will operate and choose materials and coatings that can withstand the specific environment to ensure safe and reliable performance.
By following these safety precautions, individuals can mitigate risks associated with working with motor couplings and contribute to a safe working environment for all personnel involved in the installation, maintenance, and operation of the equipment.
What are the temperature and speed limits for different motor coupling types?
The temperature and speed limits for motor couplings vary depending on their design, materials, and intended applications. Below are general guidelines for different motor coupling types:
1. Flexible Couplings
Flexible couplings usually have temperature limits ranging from -40°C to 120°C (-40°F to 248°F). The speed limits for flexible couplings typically range from a few hundred RPM (Revolutions Per Minute) to several thousand RPM, depending on the size and design.
2. Rigid Couplings
Rigid couplings can handle higher temperatures, often ranging from -20°C to 150°C (-4°F to 302°F). Their speed limits are generally higher and can extend into tens of thousands of RPM.
3. Universal Couplings (Hooke’s Joints)
Universal couplings have temperature limits similar to flexible couplings, ranging from -40°C to 120°C (-40°F to 248°F). The speed limits for universal couplings are usually lower compared to flexible or rigid couplings and are typically in the range of a few hundred to a few thousand RPM.
4. Gear Couplings
Gear couplings are capable of handling higher temperatures, ranging from -10°C to 200°C (14°F to 392°F). The speed limits for gear couplings are also high and can extend into tens of thousands of RPM.
5. Disc Couplings
Disc couplings have a broader range of temperature limits, usually from -50°C to 150°C (-58°F to 302°F). Their speed limits are typically in the range of several thousand RPM.
6. Grid Couplings
Grid couplings typically have temperature limits ranging from -20°C to 120°C (-4°F to 248°F). The speed limits for grid couplings vary but can be in the range of several thousand RPM.
It is essential to consider the specific manufacturer’s specifications and recommendations for each motor coupling type, as they may vary based on construction materials, lubrication, and other factors. Operating the couplings within their specified temperature and speed limits ensures optimal performance and extends their service life.
“`
Comparison between Grid Couplings and Other Types of Flexible Couplings
Flexible couplings are essential components in mechanical power transmission systems, and different types of couplings offer various features and advantages. Here is a comparison between grid couplings and some other common types of flexible couplings:
Coupling Type | Advantages | Disadvantages | Applications |
---|---|---|---|
Grid Couplings |
|
|
|
Elastomeric Couplings |
|
|
|
Gear Couplings |
|
|
|
The choice of coupling type depends on the specific requirements of the application. Grid couplings are favored in heavy-duty industrial machinery that requires high torque capacity and misalignment tolerance. Elastomeric couplings are commonly used in general industrial applications where flexibility and damping of vibrations are crucial. Gear couplings find applications in high-speed machinery and equipment. Ultimately, the selection of the right coupling type involves considering factors such as torque requirements, misalignment conditions, operating speed, space constraints, and budget considerations.
“`
editor by CX 2023-09-27