Product Description
High speed transmission shaft flange serpentine shaft snake spring grid flexible coupling
Description:
JS grid coupling vibration, JS grid coupling and long service life. JS grid coupling under high load range, JS grid coupling
starting safety, high transmission efficiency, reliable operation.
Features:
1.The serpentine spring as the elastic element, the elastic strong at the same time, greatly improves the grid coupling torque, widely used in heavy machinery and general machinery.The serpentine spring special technology department, has long service life, allowing higher speed, has good ability to compensate in the axial, radial and angle
2.High transmission efficiency, start safety. Transmission efficiency of up to 99.47%, short-time overload capacity is 2 times the rated torque, operation safety.
3.Simple structure, convenient assembly and disassembly, long service life
4.Damping effect is good to avoid the resonance.
Advantages:
1. Good vibration reduction and long service life
The coupling is axially embedded in the 2 halves by more than 36% of the serpentine spring. The trapezoidal cross-section serpentine spring piece is made of high-quality spring steel, which has undergone strict heat treatment and is specially processed. It has good mechanical properties, so that the service life of the coupling is much longer than that of non-metal elastic element Column pin coupling, nylon rod pin coupling) greatly increased.
2. Wide range of variable loads and safe starting
The tooth surfaces where the 2 half-couplings contact the reed are arc-shaped. When the transmission torque increases, the spring leaf will deform along the tooth arc surface, so that the force points of the 2 half-couplings acting on the reed are close. The contact point between the reed and the tooth surface, that is, the change of the torque, changes with the magnitude of the transmitted torque, and its transmission characteristics are variable stiffness. Therefore, it has a greater load variation than ordinary elastic couplings. The buffer effect produced when the transmission force makes the reed deform along the tooth arc, especially when the machine is started or when a strong impact load occurs, can protect the safety of the supporting parts to a certain extent.
3. High transmission efficiency and reliable operation
The transmission efficiency of the coupling has been determined to reach 99.47%, and its short-term overload capacity is twice the rated torque, and the operation is safe and reliable.
4. Low noise and good lubrication
The aluminum alloy casing protects the spring from being thrown out during operation, and the casing is filled with butter, which not only ensures good lubrication, but also eliminates the noise when the reeds engage by being absorbed by the grease damping.
5. Simple structure, easy assembly and disassembly
The whole machine has few parts, small size, and light weight. The spring piece designed as a trapezoidal cross-section fits the trapezoidal tooth groove very conveniently and tightly, so that the assembly, disassembly and maintenance are easier than ordinary couplings.
6. Large installation deviation is allowed
Since the spring piece is in point contact with the arc surface of the tooth, the coupling can obtain greater flexibility. It can be installed to work normally with radial, angular and axial deviations at the same time.
Packing & Delivery:
Tight packaging to protect the product from damage. Support a variety of payment and transportation methods.
About us:
HangZhou CHINAMFG machinery technology Co., Ltd is an industry transmission solutions manufacuturer and service provider.
We offer 1 stop solution for power transmission products for different factories, such as chemicals, energy, material handling, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.
We supply: Customised gears, Small gearmotors, Industrial gearboxes, Motors, Brand product sourcing.
Our industrial Gear, Gearbox, gearmotor and motor are sold to more than 30 countries. High quality, good price, in time response and sincere service are our value and promises. We aim at making happy cooperation with our customers, bring them reliable and comfortable service. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Materials Used in Manufacturing Grid Couplings
Grid couplings are designed to withstand high torque and provide flexibility while transmitting power in various industrial applications. The materials used in manufacturing grid couplings are chosen for their mechanical properties and durability. The common materials include:
- Cast Iron: Cast iron is a popular choice for the grid, hub, and outer flange components of the coupling. It offers excellent strength and wear resistance, making it suitable for heavy-duty applications.
- Steel: Steel is often used for the grid element or grid springs. It provides the required flexibility and resilience to handle misalignments and shock loads effectively.
- Alloy Steel: Alloy steel may be used for certain high-performance grid couplings. It offers enhanced strength and toughness, making it suitable for demanding industrial environments.
- Stainless Steel: Stainless steel is employed when corrosion resistance is a primary concern. It is commonly used in couplings for applications in corrosive or hygienic environments.
- Non-Metallic Materials: Some modern grid couplings use non-metallic materials, such as high-strength composites or synthetic polymers, for the grid element. These materials offer excellent dampening properties, reduce noise, and prevent electrical conductivity.
The specific material selection depends on factors like the application requirements, environmental conditions, and the level of load and torque the coupling needs to handle. Manufacturers carefully engineer grid couplings to ensure they meet the performance demands of the intended application while providing reliable and efficient power transmission.
“`
Can motor couplings handle reversing loads and shock loads effectively?
Motor couplings are designed to handle various types of loads, including reversing loads and shock loads, effectively. Let’s explore their capabilities in dealing with these load conditions:
1. Reversing Loads
Reversing loads occur when the direction of the transmitted torque alternates periodically. Motor couplings, especially flexible couplings and universal couplings (Hooke’s joints), are well-suited for handling reversing loads. These couplings can accommodate angular misalignments between the motor and driven load, allowing for smooth torque transmission even during direction changes. Properly aligned and maintained couplings can endure frequent reversals without significant wear or fatigue.
2. Shock Loads
Shock loads refer to sudden and intense forces that exceed the typical operating conditions. These loads can occur due to abrupt starts, stops, or impacts in the system. Motor couplings, particularly those with some level of flexibility, possess inherent shock-absorbing properties. Flexible couplings can dampen the impact of sudden loads, reducing the stress on connected components and preventing damage. Rigid couplings are less forgiving to shock loads but may still be suitable for certain applications where the impact is within their load-bearing capacity.
However, it’s essential to consider the specific application requirements and choose the appropriate coupling type based on the expected load conditions. Factors such as the magnitude and frequency of reversing and shock loads, system dynamics, and the overall design should be considered when selecting a motor coupling. Additionally, regular maintenance and inspection play a crucial role in ensuring that the couplings continue to perform effectively under challenging load conditions.
“`
Comparison between Grid Couplings and Other Types of Flexible Couplings
Flexible couplings are essential components in mechanical power transmission systems, and different types of couplings offer various features and advantages. Here is a comparison between grid couplings and some other common types of flexible couplings:
| Coupling Type | Advantages | Disadvantages | Applications |
|---|---|---|---|
| Grid Couplings |
|
|
|
| Elastomeric Couplings |
|
|
|
| Gear Couplings |
|
|
|
The choice of coupling type depends on the specific requirements of the application. Grid couplings are favored in heavy-duty industrial machinery that requires high torque capacity and misalignment tolerance. Elastomeric couplings are commonly used in general industrial applications where flexibility and damping of vibrations are crucial. Gear couplings find applications in high-speed machinery and equipment. Ultimately, the selection of the right coupling type involves considering factors such as torque requirements, misalignment conditions, operating speed, space constraints, and budget considerations.
“`
editor by CX 2024-04-08